Dual Vanos repair kit for BMW engines E46, E39, E60/E61, E38, E65/E66, E36, E85, E83, E53
SYMPTOMS OF FAULT
Symptoms of this failure include; overall loss of power and torque particularly in the lower RPM range, loss of power with air conditioning on, louder idle, increased fuel consumption and difficult cold weather starts and even stalls.
THE FAULT
The seals fitted to the pistons within your vehicles Vanos unit wear prematurely because they are constructed of poor quality materials; causing loss of torque and power!
If you drive a BMW 6 cylinder vehicle 1993-2006 your Vanos (variable valve timing unit) is most likely failing. The O-rings fitted to the pistons within the Vanos unit wear prematurely because they are constructed of poor quality Buna rubber which is not suited to the elevated temperatures of their location. The seals fail and lead to Vanos unit failure. BMW do not provide replacement seals, they do provide complete Vanos units at vast expense but these again are fitted with the same poor quality seals that will fail again.
THE SOLUTION
Install our upgraded Viton seals and PTFE rings and restore your Vanos unit to full health for good. Designed to last the lifetime of your vehicle not the length of the manufacturer's warranty!
By installing our improved design Viton seals and PTFE rings you will restore your Vanos unit to full health. Our seals are specifically designed for the environment in which they are fitted, well suited to the vast temperature range of the Vanos unit, constructed from improved materials designed to last. Our seals and piston rings have undergone extensive testing and will not deteriorate over time like the OEM part, designed to last the lifetime of your vehicle. Our product will restore your Vanos unit resolving the common symptoms which occur with failure noted above.
Compatible with BMW 6-cylinder engines M52TU, M56, and M54
5 series E39 - 99-03 E60/E61 - 02-05
7 series E38 - 98-01 E65/E66 - 02-05
Z3 E36 98-02
Z4 E85 02-05
X3 E83 03-06
X5 E53 00-06
3 series E46 - 98-05
YOU WILL RECEIVE
4x Replacement seals and wear rings to repair both pistons
1x RTV sealant for resealing the valve cover
9x Replacement bolts and washers
2x Anti rattle rings
1x Inner Vanos Gasket
2x Plastic plugs with the smaller o-rings
2x Piston Bolts
4x Needle bearings
When carrying out this repair you will need to remove various components to access the Vanos unit. We recommend replacing all gaskets removed with new when reassembling, these are not included in this listing but are however available under "Related Products" below.
Install our upgraded Viton seals and PTFE rings and restore your Vanos unit to full health for good. Designed to last the lifetime of your vehicle not the length of the manufacturer's warranty. Precision made from the correct improved materials, machined to fractions of a mm to provide the perfect seal.