Range Rover P38 EAS air suspension compressor seal liner valve block o-ring diaphragm kit

Range Rover P38 EAS air suspension compressor seal liner valve block o-ring diaphragm kit

.

Models Affected:

 

£42.99
 
Description
Range Rover EAS air suspension compressor pump seal and liner repair kit ANR3731
ABOUT US

X8R Ltd is a British company completely dedicated to providing high quality improved design vehicle components; correcting original manufacturers design faults. We take the common faults associated with a variety of vehicle manufacturer’s parts and re-design and manufacture parts that will not fail again or that will prevent damage to vehicles.

SYMPTOMS OF FAULT

Is your vehicles air suspension rising slowly, noisily, or perhaps failing to rise at all?

EAS fault message, "Warning do not exceed 35 mph" message, lights just flashing on height adjustment switch?

Hard fault stored, vehicle on bump stops and not rising, taking too long to reach pressure, excessive compressor running?

Leak from EAS system but no visible leaks when testing components, vehicle on bump stops? Slow leak? Complete failure of EAS system?

THE FAULT
Land Rover p38 easworn out piston seal p38 dunlop compressor

burned and scored p38 piston liner in dunlop compressor
burned and scored p38 piston liner in dunlop compressor
burned and scored p38 piston liner in dunlop compressor
The piston seal within your vehicles EAS air compressor is worn and perhaps the liner also and the filters saturated reducing output significantly.

The diaphragm seal and O-rings within your vehicles EAS valve block system can also wear causing the symptoms noted above.

The likely cause of the faults noted above and most common cause is a worn piston seal and or liner within the air suspensions compressor unit. Coupled with saturation of the filters in the compressors
filter unit. This results in reduction of compressor output and triggers vehicle faults as well as
extending the time taken to lift the vehicle.

The diaphragm and or O-rings within the valve block can also wear and can lead to the compressor overworking causing complete EAS failure, we always recommend replacing the diaphragm seal when replacing the o-rings in the valve block as both can cause leaks and EAS failure.

THE SOLUTION

replacement piston seal fitted in dunlop compressor p38

p38 liner fitted into dunlop compressor
p38 valveblock o rings fitted into dunlop compressor

diaphragm seal fitted to p38 range rover block
Fit our improved design piston seal, piston liner, filter kit, valve block O-rings and diaphragm and restore your EAS system to full health.

Our complete kit includes all needed to restore your compressor to full health. Our kit includes a
new improved design piston seal constructed to the finest of tolerances from
improved materials to restore full output.

A replacement piston liner to replace your scored or damaged liner.

Full filter replacement kit to allow you to replace all filters,
the original filters saturate quickly and drastically effect output, our improved replacements will
solve this problem.

Fit our Viton O-rings and cure those valve block leaks, importantly our O-rings are made from Viton 75, this material is suitable for the elevated and varying temperature range which the valve block endures. Viton rubber also has extremely good wear resistance far outlasting Silicone and Buna O-rings. Beware of cheap kits with Silicone and Buna O-rings we only ever use Viton.

Fit our diaphragm seal, this is made in the same way as the OEM seal, beware of aftermarket designs that cause the compressor to run on and burn out, this part is precision made to prevent this.

UK stock
Recondition your compressor at a fraction of the cost of a whole new unit!
Next day delivery available
Improved design parts

Range Rover EAS air suspension compressor pump seal and liner repair kit ANR3731 Installation Instructions - YouTube

Video will open in a new window

VEHICLES AFFECTED
Range Rover Classic
Range Rover Classic 1993-1996
Range Rover p38
Range Rover P38 1994–2002
LDV and Citroen models
Many Citroen and LDV models


 

dunlop compressor

Our kit will only repair the original Dunlop compressor illustrated above.

If the compressor has been changed in vehicles life to a different compressor our kit may not repair this.

It is worthwhile checking the compressor is as illustrated (see instructions on how to access compressor)

Associated part numbers:
0180A-EP-02, ANR3731, ANR3731G.

Valveblock part numbers:
E311660030 , 38769609

YOU WILL RECEIVE
range rover p38 complete EAS overhaul kit seal liner valveblock and diaphragm kit

1x Piston seal

1x Piston liner

2x Compressor head seals

1x Complete filter kit including o-rings

1x Complete Valveblock o-ring overhaul kit consisting of:

3x Valve Seals
1x Diaphragm Solenoid Housing Base Seal
18x Diaphragm Solenoid Base Seals
7x Solenoid Plunger Seals
4x Port Seals
16x Airline Seals
2x Solenoid Base Seals

1x Diaphragm seal

Additional Information

Ebay Text
Ebay Text 2 Range Rover EAS air suspension compressor pump seal and liner repair kit ANR3731
ABOUT US

X8R Ltd is a British company completely dedicated to providing high quality improved design vehicle components; correcting original manufacturers design faults. We take the common faults associated with a variety of vehicle manufacturer’s parts and re-design and manufacture parts that will not fail again or that will prevent damage to vehicles.

SYMPTOMS OF FAULT

Is your vehicles air suspension rising slowly, noisily, or perhaps failing to rise at all?

EAS fault message, "Warning do not exceed 35 mph" message, lights just flashing on height adjustment switch?

Hard fault stored, vehicle on bump stops and not rising, taking too long to reach pressure, excessive compressor running?

Leak from EAS system but no visible leaks when testing components, vehicle on bump stops? Slow leak? Complete failure of EAS system?

THE FAULT
Land Rover p38 easworn out piston seal p38 dunlop compressor

burned and scored p38 piston liner in dunlop compressor
burned and scored p38 piston liner in dunlop compressor
burned and scored p38 piston liner in dunlop compressor
The piston seal within your vehicles EAS air compressor is worn and perhaps the liner also and the filters saturated reducing output significantly.

The diaphragm seal and O-rings within your vehicles EAS valve block system can also wear causing the symptoms noted above.

The likely cause of the faults noted above and most common cause is a worn piston seal and or liner within the air suspensions compressor unit. Coupled with saturation of the filters in the compressors
filter unit. This results in reduction of compressor output and triggers vehicle faults as well as
extending the time taken to lift the vehicle.

The diaphragm and or O-rings within the valve block can also wear and can lead to the compressor overworking causing complete EAS failure, we always recommend replacing the diaphragm seal when replacing the o-rings in the valve block as both can cause leaks and EAS failure.

THE SOLUTION

replacement piston seal fitted in dunlop compressor p38

p38 liner fitted into dunlop compressor
p38 valveblock o rings fitted into dunlop compressor

diaphragm seal fitted to p38 range rover block
Fit our improved design piston seal, piston liner, filter kit, valve block O-rings and diaphragm and restore your EAS system to full health.

Our complete kit includes all needed to restore your compressor to full health. Our kit includes a
new improved design piston seal constructed to the finest of tolerances from
improved materials to restore full output.

A replacement piston liner to replace your scored or damaged liner.

Full filter replacement kit to allow you to replace all filters,
the original filters saturate quickly and drastically effect output, our improved replacements will
solve this problem.

Fit our Viton O-rings and cure those valve block leaks, importantly our O-rings are made from Viton 75, this material is suitable for the elevated and varying temperature range which the valve block endures. Viton rubber also has extremely good wear resistance far outlasting Silicone and Buna O-rings. Beware of cheap kits with Silicone and Buna O-rings we only ever use Viton.

Fit our diaphragm seal, this is made in the same way as the OEM seal, beware of aftermarket designs that cause the compressor to run on and burn out, this part is precision made to prevent this.

UK stock
Recondition your compressor at a fraction of the cost of a whole new unit!
Next day delivery available
Improved design parts

Range Rover EAS air suspension compressor pump seal and liner repair kit ANR3731 Installation Instructions - YouTube

Video will open in a new window

VEHICLES AFFECTED
Range Rover Classic
Range Rover Classic 1993-1996
Range Rover p38
Range Rover P38 1994–2002
LDV and Citroen models
Many Citroen and LDV models


 

dunlop compressor

Our kit will only repair the original Dunlop compressor illustrated above.

If the compressor has been changed in vehicles life to a different compressor our kit may not repair this.

It is worthwhile checking the compressor is as illustrated (see instructions on how to access compressor)

Associated part numbers:
0180A-EP-02, ANR3731, ANR3731G.

Valveblock part numbers:
E311660030 , 38769609

YOU WILL RECEIVE
range rover p38 complete EAS overhaul kit seal liner valveblock and diaphragm kit

1x Piston seal

1x Piston liner

2x Compressor head seals

1x Complete filter kit including o-rings

1x Complete Valveblock o-ring overhaul kit consisting of:

3x Valve Seals
1x Diaphragm Solenoid Housing Base Seal
18x Diaphragm Solenoid Base Seals
7x Solenoid Plunger Seals
4x Port Seals
16x Airline Seals
2x Solenoid Base Seals

1x Diaphragm seal

Model Affected No
The Problem No
The Solution No
Vehicle Compatibility No
FAQ No
REVIEWS No
For Car No