Land Rover Discovery Defender TD5 2.5 Diesel Full Denso Solenoid Starter Motor Repair Kit

Land Rover Discovery Defender TD5 2.5 Diesel Full Denso Solenoid Starter Motor Repair Kit

Our repair kit in this listing addresses the common failure of the Land Rover TD5 starter motor. Our components described herein with the assistance of our supportive instruction media will allow you to replace just the faulty components which always fail within the starter motor without having to replace the starter motor unit. An extremely common fault corrected by our repair kit.

Models Affected:

 

£14.99
 
Description


Our repair kit in this listing addresses the common failure of the Land Rover TD5 starter motor. Our components described herein with the assistance of our supportive instruction media will allow you to replace just the faulty components which always fail within the starter motor without having to replace the starter motor unit. An extremely common fault corrected by our repair kit.

Land Rover TD5 Starter plunger view 1
  • Land Rover TD5 Starter plunger view 3
  • TD5 Solenoid contacts
  • TD5 Contacts
  • TD5 Stater motor solenoid contacts
  • TD5 starter points
  • TD5 starter motor repair kit
symptoms of fault
The symptoms of this fault are very obvious; turning the key to start the vehicle you will hear a clicking sound and the vehicle will not start, this may well be intermittent with the first few attempts clicking then the starter engaging and the engine starting or you may be unable to start the vehicle at all.
the cause

Plunger fault td5 starter

The contacts and plunger wear within the solenoid housing causing the fault.

The cause of the fault with these starters is worn contacts and a worn plunger assembly within the solenoid housing. The wear to the brush gear, armature, drive gear and bearings is nominal and these components rarely fail, the starter motor is a very robust unit save for the solenoid contact and plunger which cause the faults.
During its service life these copper contacts are spark eroded and wear away to the point that the electrical contact is lost causing the starter motor to no longer fire / function. It is a very straight forward job to replace these components with our new parts to restore the starter motor to full health, with no difference in cranking power in comparison to a brand new unit.

It is extremely rare that the unit cannot be overhauled to restore function.

the solution
Plunger fault td5 starter
Install our replacement solenoid contact points and plunger to restore your starter motor

We offer replacement contacts and a plunger assembly which can be fitted within the solenoid housing to restore the starter motor to full power. The replacement process is extremely easy, pictorial and video instructions are provided by us to guide you through this process. Our repair kit allows you to save the cost of a new starter motor which will have the same contacts and plunger fitted causing the same faults over time.

Video Instructions
instructions
Repair Guide
Vehicles Affected
Land Rover Discovery Series 2 Models (II) TD5 2.5 Diesel manufactured from 1998 through to 2004.

Land Rover Defender 90 /110 Models TD5 2.5 Diesel manufactured from 1998 through to 2006.


Engine codes:

10P, 15P and 16P.

Starter motor part numbers:
OEM: 228000-7220, NAD101240. Nippon Denso.
Others: ACD STM617, Lucas LRT00171, Hella CS1242, Delco Remy DRS3718, XL 91371, QS2556, 80551389, 2.0 kW, 2.2 kW.

To be certain of compatibility part numbers can be found on a silver sticker on the starter motor body.
You will receive
starter-repair-whats-included

Our repair kit includes all the components you will need to restore your starter motor including:

x2 contacts, x2 long copper contact bolts. Teardrop insulator (not supplied by many) 3x insulators, 2x O ring seals, 2x washers, 2x lock washers, 2x full size nuts, 2x half size nuts. All needed is included to successfully repair your starter motor. Please view our videos to see our parts being fitted and tested.

Additional Information

Ebay Text
Ebay Text 2


Our repair kit in this listing addresses the common failure of the Land Rover TD5 starter motor. Our components described herein with the assistance of our supportive instruction media will allow you to replace just the faulty components which always fail within the starter motor without having to replace the starter motor unit. An extremely common fault corrected by our repair kit.

Land Rover TD5 Starter plunger view 1
  • Land Rover TD5 Starter plunger view 3
  • TD5 Solenoid contacts
  • TD5 Contacts
  • TD5 Stater motor solenoid contacts
  • TD5 starter points
  • TD5 starter motor repair kit
symptoms of fault
The symptoms of this fault are very obvious; turning the key to start the vehicle you will hear a clicking sound and the vehicle will not start, this may well be intermittent with the first few attempts clicking then the starter engaging and the engine starting or you may be unable to start the vehicle at all.
the cause

Plunger fault td5 starter

The contacts and plunger wear within the solenoid housing causing the fault.

The cause of the fault with these starters is worn contacts and a worn plunger assembly within the solenoid housing. The wear to the brush gear, armature, drive gear and bearings is nominal and these components rarely fail, the starter motor is a very robust unit save for the solenoid contact and plunger which cause the faults.
During its service life these copper contacts are spark eroded and wear away to the point that the electrical contact is lost causing the starter motor to no longer fire / function. It is a very straight forward job to replace these components with our new parts to restore the starter motor to full health, with no difference in cranking power in comparison to a brand new unit.

It is extremely rare that the unit cannot be overhauled to restore function.

the solution
Plunger fault td5 starter
Install our replacement solenoid contact points and plunger to restore your starter motor

We offer replacement contacts and a plunger assembly which can be fitted within the solenoid housing to restore the starter motor to full power. The replacement process is extremely easy, pictorial and video instructions are provided by us to guide you through this process. Our repair kit allows you to save the cost of a new starter motor which will have the same contacts and plunger fitted causing the same faults over time.

Video Instructions
instructions
Repair Guide
Vehicles Affected
Land Rover Discovery Series 2 Models (II) TD5 2.5 Diesel manufactured from 1998 through to 2004.

Land Rover Defender 90 /110 Models TD5 2.5 Diesel manufactured from 1998 through to 2006.


Engine codes:

10P, 15P and 16P.

Starter motor part numbers:
OEM: 228000-7220, NAD101240. Nippon Denso.
Others: ACD STM617, Lucas LRT00171, Hella CS1242, Delco Remy DRS3718, XL 91371, QS2556, 80551389, 2.0 kW, 2.2 kW.

To be certain of compatibility part numbers can be found on a silver sticker on the starter motor body.
You will receive
starter-repair-whats-included

Our repair kit includes all the components you will need to restore your starter motor including:

x2 contacts, x2 long copper contact bolts. Teardrop insulator (not supplied by many) 3x insulators, 2x O ring seals, 2x washers, 2x lock washers, 2x full size nuts, 2x half size nuts. All needed is included to successfully repair your starter motor. Please view our videos to see our parts being fitted and tested.

Model Affected No
The Problem No
The Solution No
Vehicle Compatibility No
FAQ No
REVIEWS No
For Car No