Intake Manifold Swirl Flap Operating Rod (With Bushes) for Alfa Romeo, Fiat, Vauxhall & Saab
|Ebay Text 2|
SYMPTOMS OF FAULT
Engine management light (EML) lit, high fuel consumption, rough idling, rough running, poor power and torque, smoking from exhaust, error P2279-11 Intake system air leak,P2075 fault code?
The bearing bushes on the swirl flap operating rod wear and the rod pops off causing the symptoms noted above.
All of these symptoms can be caused by the swirl flap operating rod bushes wearing making the operating rod pop off; stopping the swirl flaps from operating, you will often see the rod lying on top of the intake manifold.
Replace the operating rod with our improved design rod fitted with brass bearing bushes designed to not pop off again!
Rather than having to remove the manifold and replace at great cost with the problem reoccurring in the future our rod replacement solves this issue, replace the unreliable bush bearings with our improved design bearings which will not fail again. Our self lubricating bushes are made from billet Brass, fitted with a Viton O-ring and Stainless steel fasteners, designed to never fail again.
Our rod is a direct replacement, our rod comes fully constructed with brass buses so will simply push fit on to the manifold. We also offer the brass bushes on their own in our store if you wish to save a little money by reusing the original rod.
Made from billet brass, to last the lifetime of your vehicle!
Next day delivery available
Improved design parts
Our kit will only repair the original Pierburg inlet manifold .
It is worthwhile checking inlet manifold is as illustrated.
Some of the vehicles affected and associated part numbers:
Alfa Romeo - 939A200 ( 1.9 MultiJet JTDM 16V 110 kW / 150 PS)
147 - 1.9 JTDM 8v 2005+ [HP 120]
147 - 1.9 JTDM 16v 2005+ [HP 150]
147 - 1.9 JTD 16v 2004+ [HP 136]
156 - 1.9 JTD 2003-2005 [HP 126]
156 - 1.9 JTD 2004-2005 [HP 150]
156 Sportwagon - 1.9 JTD 16v Q4 2004-2006 [HP 150]
156 Sportwagon - 1.9 JTD 2005-2006 [HP 150]
156 Sportwagon - 1.9 JTD 2003-2006 [HP 126]
159 Saloon - 1.9 JTDM 8v 2005+ [HP 120]
159 Saloon - 1.9 JTDM 8v 2005+ [HP 115]
159 Saloon - 1.9 JTDM 16v 2005+ [HP 136]
159 Sportwagon - 1.9 JTDM 8v 2006+ [HP 120]
159 Sportwagon - 1.9 JTDM 8v 2006+ [HP 115]
GT - 1.9 JTD 2003+ [HP 150]
Fiat - Enigines M91 & M92
Croma - 1.9 D Multijet 2005+ [HP 150]
Stilo - 1.9 D Multijet 2005+ [HP 150]
Stilo Multi Wagon - 1.9 D Multijet 2005+ [HP 150]
Vauxhall - Engines Z19DTH & Z19DTJ
Astra Mk V (H) - 1.9 CDTi 2004-2009 [HP 150]
Astra Mk V (H) - 1.9 CDTi 2004-2009 [HP 120]
Astra Mk V (H) Estate - 1.9 CDTi 2004-2009 [HP 150]
Astra Mk V (H) Sports Hatch - 1.9 CDTi 2004-2010 [HP 150]
Astra TwinTop Mk V (H) - 1.9 CDTi 2006+ [HP 150]
Astravan (H) - 1.9 CDTi 2005+ [HP 150]
Signum - 1.9 CDTi 16v 2004-2008 [HP 150]
Vectra MK II (C) - 1.9 CDTi 16v 2004-2005 [HP 150]
Vectra MK II (C) GTS - 1.9 CDTi 16v 2004-2005 [HP 150]
Vectra MK II (C) Estate - 1.9 CDTi 16v 2004-2005 [HP 150]
Zafira MK II (B) - 1.9 CDTi 2005-2011 [HP 150]
Saab - Engines Z19DTH & Z19DTJ
9-3 Saloon - 1.9 TiD 2004+ [HP 150]
9-3 Convertible - 1.9 TiD 2006+ [HP 150]
9-5 Saloon - 1.9 TiD 2006+ [HP 150]
9-5 Estate - 1.9 TiD 2006+ [HP 150]
2.03462.03, 55210201, Pierburg inlet manifold, 93179055, 55206459, 55182684 GM, Z19DTH.
YOU WILL RECEIVE
1x Rod fitted with 4 x brass bushes and viton o-rings